The pump unit has a wide flow range up to 0-3 (LPM) Litres Per Minute adjustable. The desired flow rate is pre-set and maintained constant within a tolerance of Â± 5 %. When pressure drop across the filter increases as contamination buids up, the control circuit automatically senses the rising current/ demand by the motor voltage to compensate to maintain preset constant flow rate.
Unit is powdered by dry cell or a re-chargeable which can be recharged in place via a socket or can be interchanged very rapidly to allow the instrument to continue sampling on consecutive shifts. A Low Battery Alarm is provided Setting of Flow rate has been made simple for the user and is settable through membrane switch is settable the flow rate over the entire range
Sampling Heads & Filters :The sample heads used with high flow personal sampling pump fall under:
We offer user fillable Silica Gel holders with end plugs. Vapours may subsequently be stripped off for chemical analysis. Alternatively bubbler type liquid traps may be used to absorb gases or vapours by suitable liquids. Special heads for separating respiration of the dust from larger, non-respirable particulate are available.
HNL Personal air sampler with an appropriate sample head are designed to collect virtually any industrial contaminant including particulate samples like dust, fibres, fumes and mists as well as vapours and gases where a high flow rate is permitted.
Air containing contaminants is drawn through the sampling head at an optimum rate. The suction is provided by a pump driven by DC Motor with dry or Rechargeable batteries. Flow rate is variable by the user to suit the sampling techniques.