- Piece/Pieces
- 1
- Piece/Pieces
- 90000.00 - 180000.00 INR
- SS 316
- 230 V AC , 50 Hz
- 3 Watt (W)
- 2% %
- 200 mm - 1000 mm
- 0-1000
Dustguard Particulate Monitor
If a Process Trend Monitor and Multi-Purpose Dust Alarm with display is necessary in your facility, then use this dustguard particulate monitor system. This monitoring instrument can continuously monitor indicative dust in real time with an additional capability of logging and alarm. Your monitoring requirements can be met with this low cost solution.
Features of Dustguard Particulate Monitor PM-250:
- There are no moving parts in this instrument, which is why it can be installed with ease and in no time.
- This monitoring system requires low capital investment and maintenance cost.
- This highly sensitive instrument can be calibrated to show emission levels in mg / m3.
- It can be adjusted, from 1-1,000 mg/m3.
- The minimum detection limit of this instrument is less than 1 mg/m3.
Technical Specification
Technique | Tribo Electric charge transfer |
Sensitivity | Adjustable over a wide dynamic range |
Operating Temp (Gas). | -15 to 250 C (T Model up to 700 C ) |
Ranges | 1-1,000 mg/m |
Response Time | Instantaneous |
Duct Diameter | 25 mm to 2.2 m |
Positioning | 90C to Duct Wall |
Output connector | Single Flat Flanged Fitting |
Material of Construction | SS316 |
Probe Length | 25, 100, 250, 500, 750, 1000 mm |
Probe Diameter | 16 mm |
Insulation | PTFE (T Model Glass Ceramic) |
Type | WP Aluminum casting |
Size | 115 X 65 X 55 mm |
Output | 3 wire 4-20 mA |
Area | Suitable for Hazardous areas |
Alarms | Green Normal |
Averaging Time | Yellow Warning |
Output Remote Alarm | Red High Alarm |
Output Remote data (Optional) | Programmable |
Output | & 4 20 mA |
Digital out (Optional) | RS 232 / RS 485 |
Housing | ABS Polycarbonte |
- Telegraphic Transfer (T/T)
- 10 Per Month
- 3 Week
- Yes
- Within a certain price range free samples are available
- As per companies standards
- Middle East, Africa, Asia
- All India
- CMRI approved enclosure